Handmade Triplet of Fresh water Pearls and Solid Silver Ring
SKU:
R02S-P
£62.00
£62.00
per item
Gorgeous Freshwater Pearl and Solid Sterling Silver Ring hand-crafted on a kibbutz in Israel. The Pearls have a bezel setting.
Diameter 17.5: Size 7 (USA/Canada), O (UK).
The band is 4.5mm wide. Pearls measure 4.5mm each. The band is textured with a darkened patina which is oxidised.
Diameter 17.5: Size 7 (USA/Canada), O (UK).
The band is 4.5mm wide. Pearls measure 4.5mm each. The band is textured with a darkened patina which is oxidised.
1 available
Ring Size Chart
About Oxidised Silver
A piece of blackened or oxidised silver is true sterling silver, but it’s surface has been intentionally darkened by introducing it to a chemical process. This patina, a surface colour that occurs when the silver is introduced to sulfides, is a sped up version of the natural tarnishing process. A layer of silver sulfide forms on the exterior of the metal giving it a blackened look.
The range of colours that can be achieved from this process is extensive. At full strength, the colour will appear a matte gunmetal black. But with a controlled application, a whole rainbow of colours can be achieved including blues, purples, yellows, and reds.
Like other patinas, oxidised silver is just a surface treatment and does not change the internal colour or properties of the metal, however, over time and depending on the amount of wear you give your pieces, the oxidized finish will polish off and the true color of the silver will shine through.
Oxidised finishes have the longest life on pieces that come into minimal contact with their surroundings, such as earrings and necklaces. Rings and bracelets tend not to hold their color quite as long since they rub on things we touch more frequently. Blackened finishes which have been applied to the recesses of a design tend to hold their color best while the raised areas of the piece polish up over time.
It’s best to remove your oxidised silver jewellery before aggressive contact and when showering or washing your hands to prolong the dark colour. In general, oxidised silver jewellery should not be cleaned with jewellery cleaning dips or aggressive polishing that will strip the blackened surface. If cleaning is necessary, use mild dish detergent and soft toothbrush with as little rubbing as possible.
The oxidised finish of jewellery can be restored at any time. Enquire at your local jeweller to see if they can touch up your oxidised finish.
The range of colours that can be achieved from this process is extensive. At full strength, the colour will appear a matte gunmetal black. But with a controlled application, a whole rainbow of colours can be achieved including blues, purples, yellows, and reds.
Like other patinas, oxidised silver is just a surface treatment and does not change the internal colour or properties of the metal, however, over time and depending on the amount of wear you give your pieces, the oxidized finish will polish off and the true color of the silver will shine through.
Oxidised finishes have the longest life on pieces that come into minimal contact with their surroundings, such as earrings and necklaces. Rings and bracelets tend not to hold their color quite as long since they rub on things we touch more frequently. Blackened finishes which have been applied to the recesses of a design tend to hold their color best while the raised areas of the piece polish up over time.
It’s best to remove your oxidised silver jewellery before aggressive contact and when showering or washing your hands to prolong the dark colour. In general, oxidised silver jewellery should not be cleaned with jewellery cleaning dips or aggressive polishing that will strip the blackened surface. If cleaning is necessary, use mild dish detergent and soft toothbrush with as little rubbing as possible.
The oxidised finish of jewellery can be restored at any time. Enquire at your local jeweller to see if they can touch up your oxidised finish.